AcuRite Iris (5-in-1) Indoor/Outdoor Wireless Weather Station for Indoor and Outdoor Temperature and Humidity, Wind Speed and Direction, and Rainfall with Digital Display (01512M)

Product Information

It's worth noting though that the AcuRite driver distributed with weeWX (in bin/weewx/drivers/acurite. The AcuRite Access really only has one purpose, and that’s connecting your Atlas weather station to the Internet. Furthermore, mast-based sensors may require that you have permission from a specific property before installation. If you are unable to provide the insured product at point of claim for inspection it will be classed as lost and not covered.

svg~ class=~alert_Icon~ alt=~CA Proposition 65 Warning~> WARNING: Cancer and Reproductive Harm -

It is important to refer to the user manual for troubleshooting tips, maintenance guidelines, and other relevant information. Regularly consulting the user manual or the product manual helps users optimize the performance and longevity of their AcuRite weather station. This Logia 5-in-1 (wind speed and direction, temperature, humidity, rainfall) weather station provides very accurate data that is pushed to the cloud and then accessible via free iOS or Android apps. Finally, I'm a complete novice at this and I appreciate all the work that you have done for the Acurite driver.Rainfall and barometric pressure readings also seemed to be on point, and an improvement over previous AcuRite consoles we’ve tested. The Access operates by receiving the wireless signal from the weather station and then sending that data to your router for uploading to the internet.

Both support the Access base station to connect to the internet to share weather data, which the Notos do not. The AcuRite Iris includes all of the measurements above and adds a rain gauge and a wind vane for wind direction, while the Atlas further adds UV and light intensity (lux) and optional lightning detection. data in the 'dodgey data' messages are suspect because of the trailing 00 - even though the rssi is high (03), the 00 seems to indicate that the console has lost contact with the sensor cluster. if we tried to calculate temperature and pressure using those calibration constants, we would get bogus results.

Your outdoor sensor will connect to an indoor monitor that displays measurements in a standard setup.