Joined in 2023 
82 
63 About this deal
Upgraded UV Light Source Module: The Creality LD-002H is equipped with a UV integrated light source, providing improved light transmission. The UV light achieves 8000uw/cm². A consistent UV light source is the most important factor in printing.
Does this is really a great change? With this new printer, you no longer need to buy various kinds of toys for your children. You may even start your own business using the model featuring wide choices, easier operation, and higher efficiency.I had the chance to test this new Creality LD-002H printer among the first ones, I had already been pleasantly surprised by the old 2R version, and it is also the case for this 2H.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat. However, by default, the plate movements are not very fast (50mm), so this will slow down your prints, for my part I replaced the lifting speed and base lifting speed values at 100mm. Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly. Definitely a must-have feature for each and every resin 3D printer out there, the LD-002H has been integrated with a high-quality air filtration system with activated carbon that contributes to keeping obnoxious odors of exposed resin at bay. Even though the system eliminates most of the fumes, we strongly recommend you to use the machine in thoroughly ventilated premises. The air filtration system is located at the rear side of the build chamber. So the LD-002H resin 3d printer adopted 1620*2560 higher resolution with higher precision. Now the machine is able to manifest every detail of the model to us. This satisfies your needs for higher-quality products.The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc. There are some factors that greatly influence your printing success no matter what material you choose.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems. For the second print, I will create my own file, using the Chitubox software, which already offers a default profile for the Creality LD-002H, you will need version 1.6.5.If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters. Creality offers two MSLA resin 3D printers in the LD-002X family; the LD-002R, the subject of this review, and the LD-002H. The primary difference between the two is the LCD used for masking; the LD-002R uses a 5.5” RGB LCD screen which requires a longer exposure time while the LD-002H uses a 6.08” inch Mono LCD which can make layers at almost four times the speed. Mono LCD screens allow more of the UV exposure to reach the vat, which greatly reduces the amount of time required to cure each layer. All in all, the Creality LD-002H is an excellent resin 3D printer that offers a decent build volume and lets you produce remarkably detailed outputs in a swift and consistent fashion. Thanks to being equipped with a monochrome LCD matrix, the LD-002H offers prolonged service life alongside low power consumption. This is an affordable and easy-to-use device that will be a perfect choice for both entry-level and more experienced makers. The printer’s parameters make it a perfect device to produce tabletop miniatures, prototypes, art designs, jewels, high-precision models, dental impressions, and much more. For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
Great Deal 
New Comment