Everbuild 507 Rendagrip | Quick Drying, Extra Grip Render Bonding Agent, Suitable for Concrete, Brickwork and Blockwork - 10 Litre

Product Information

Coverage: Approximately 3 meters square per litre depending on porosity and how rough the substrate.

A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. To ensure your rendering goes as smoothly as possible and you stand the best chance of getting a great finish you will need the following tools and materials: As you drag the straight edge up the wall and pull off any high spots it is inevitable that you will leave some holes as the render clings together and some is pulled off by the straight edge.

JOIN THE BOND IT NEWSLETTER

Finishing the Render After the second layer is applied, the render should be finished to achieve a smooth and even surface. This may involve using a float or trowel to remove any rough patches or create a textured finish. Subsequently, the render must dry and set for at least 24 hours, with extended drying times in damp or humid conditions.

Improved Appearance. Sand and cement render can enhance a building’s appearance, providing a uniform finish that can be further customized with paint or tint. Follow recommended ratios to achieve the correct consistency when mixing sand and cement. Avoid excessively dry or wet mixes. There is no need to scratch right down to the original wall surface, just a few millimeters deep enough to provide a key for the second coat. Having the right tools and equipment on hand can make your cement rendering project smoother and more efficient while helping you achieve a high-quality finish. Always prioritize safety and proper technique when working with these tools. ConclusionEasy Application. The application process, whether manual or mechanical, is straightforward. Maintenance and repairs are also relatively simple if needed. Prime the Surface Apply a thin, even coat of a suitable primer designed for sand and cement render. Let it dry fully before painting. These bonding agents are designed for trade users, making sure they have access to the best products possible when it comes to wall finishing. As in this example, the wall needing to be rendered is fairly large so the render is mixed using a cement mixer. As stated the ratio to use for your first mix is 5:2:1 – 3 sharp sand, 2 soft sand and 1 cement.