Joined in 2023 
82 
63 About this deal
The Arduinos have their on-board USB-TTL UART converters so they don’t usually run into the process of hooking this external module. Since 5 V is a voltage which is also suitable for a lot of low to medium power (up to a couple of Watt) electronics it was choosen to be used for USB as well. Note that the supply of USB is 5 V, the data signals use a lower voltage. FTDI drivers are available for Windows CE 4.2-5.2, 6.0/7.0 and 2013. Support for older versions of Windows Desktop Electrostatic reverse connection: When reverse voltage appears between the pins, or when subjected to electrostatic discharge, its internal circuit may be damaged. We have had a few reports on Windows 10 where the driver will automatically install and the board will show up under a new COM port as USB-Serial CH340, but with a different device name. However, the board cannot be accessed on the Arduino IDE. Others have had issues where the installation process hangs.
Simply put, the CH340 driver is a piece of software that connects the CH340 chip with the computer to facilitate the chip’s communication with the PC. Q2. How do I test my CH340 driver? Bottom line, unless you enjoy chasing down problems you will be better off buying the more expensive ftdi or other non-Chinese designed chips. March 29, 2022 at 2:57 pm VCP (Virtual COM Port): The PC side will be recognized as a serial port, using the serial protocol.For those who are interested in building their own UI Serial Terminal Application, I’ve also taken this route when I was in the same situation. However, it may be unnecessarily overwhelming at this moment. You can just plan to do it in the future after getting this LAB done & tested with any terminal that works for you. The parallel IO ports can still be used to display your data in a more convenient way such as 7-segments display as we’ve discussed earlier in this course. Or even the alphanumeric LCDs as we’ll see in the upcoming tutorials. You can build your own serial monitor with whichever language you prefer (i.e Java, C++, Python, C#). Just search for a proper toolchain (toolkit) that supports building GUI applications (i.e QT for C++, .NET for C#, PyQT for python, etc). Having the ability to do so, will help you debug your code, provide visual UX for your projects, and much more.
The FTDI Chip TTL-232x USB to Serial UART (TTL level) converter cables provide a simple and fast way to convert microcontroller UART serial I/O to USB. The TTL-232R contains a small circuit board which includes the FT232x chip. Encapsulated in a USB-A connector, making the cable easy and straight forward to use. The circuit is powered from the USB +5 V power pins, and any Vcc connection is always at +5 V dc. However products are available with signal TTL logic levels of either +3.3 V or +5 V. Provide sufficient heat dissipation and temperature control to avoid use under extreme temperature conditions. Red - power. This pin provides up to 500mA current. YOU MUST NOT use other power supplies if you choose to power the target device with this Adaptor. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).Overvoltage and overcurrent, electrostatic reverse connection, harsh environment, electromagnetic interference, and other conditions may cause IC damage:
Open the MPLAB IDE and create a new project name it “PC_Control_USB-TTL”. If you have some issues doing so, you can always refer to the previous tutorial using the link below.Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Electromagnetic Interference: A strong electromagnetic interference environment may affect the normal operation of the chip, causing performance problems or even damage. There are many options to choose from for this part. You can obviously use any serial terminal (e.g. TeraTerm) or even the simple Arduino Serial Monitor or whichever you prefer. Arduino Serial Monitor PLEASE NOTE – When editing driver INF files, refer to the following document: AN_107 – Advanced Driver Options
Great Deal 
New Comment